Average Reviews:
(More customer reviews)I have only had a chance to use it on one job and that was screwing
1/2 plywood onto metal studs on a retail space remodeling job. It
worked okay but I discovered two main problems with the design. First,
The way it is designed there is no reverse and no way to remove a
screw that misses the stud so you need to keep your cordless
drill/screwgun handy and if you push the nose against the surface it
advances the screw so if you make a false start you skip a screw (this
problem becomes less important as you get used to using it). The last
thing is make sure to secure it the whole way onto your belt using the
belt clip I dropped mine a couple times before I realized I wasn't
sliding the belt clip on the whole way, but I am pleased they designed
it with a belt clip- good design idea! It performed well during the
job and I love the fact that I didn't have to hook up a cord. Finally
my partner gave up using his electric screwgun and started using my
Duraspin while I cut the plywood sheets to fit. It makes it a whole
lot easier to hold a sheet of plywood while fastening them if you
don't have to fumble with the screws. Be aware it may be very
difficult to find screws for this screw gun - Home Depot in Atlanta
carries coarse thread 1-1/4" drywall screws for 13.00 a bucket
(1000) It takes about a strip of screws per sheet of plywood or
drywall- but to find the fine thread screws for metal studs I had to
go all over the place (and Atlanta is a pretty big town). I have
noticed a strange hum from the gun after you release the trigger, like
the motor is still running slightly- I think this is probably peculiar
to my gun but it may turn out to be problem that wears it out or burns
up the motor and drains the batteries. Speaking of the batteries they
seem to last long enough to charge one while using the other. The gun
is very light, surprisingly so if you are used to 18 volt drills.
Yes, I would buy if again if given the choice but I don't think I'll
throw away my electric drywall screwgun yet.
Click Here to see more reviews about:
Senco DS202-14V 3P0001N 14.4-Volt Ni-Cad Cordless ScrewdriverThe Senco DS202-14V 14.4-Volt Ni-Cad Cordless Screwdriver is designed for a wide variety of screw fastening applications ,including drywall to wood, drywall to steel, interior wood to wood, and exterior wood to wood. For use with 1- to 2-inch screws, this cordless screwdrivers features a powerful 2,300 RPM high-torque motor and a reverse switch to back out driven screws without any strain. Its easy depth of drive adjustment regulates the precise amount of countersink. Included with the driver is a one-hour charger and a back up battery, ensuring that you'll never be without power on the job. And with a 50-screw capacity in each strip, the Senco DS202-14V will speed up your production time.
What's in the Box Senco DS202-14V Cordless Screwdriver, 2 14.4-volt batteries, one-hour battery charger, 2 #2 Phillips and 3 #2 square drive bit tips, and rugged carrying case
Get 12% OFF
Click here for more information about Senco DS202-14V 3P0001N 14.4-Volt Ni-Cad Cordless Screwdriver
