Average Reviews:
(More customer reviews)[...]That is a great bargain considering it is probably the highest quality screw that you'll find for general outdoor construction.
For the 2-1/2 inch length you get 420 screws per 5lb box.
For the 3 inch length you get 350 screws per 5lb box.
For the 3-1/2 inch length you get 285 screws per box.
The screw is rated for a working load of 240lbs shear and 750lbs pullout. The ultimate rated strength is 320lbs and 1000lbs, respectively.
These screws are listed as either made in the USA or Germany. I'm more than happy with either location as they're both good indicators of quality (not made in China for sure). The manufacturer is ISO 9001:2000 certified.
The quality of the screw is most evident when driving the screws into hard material. You can see the great quality control in the tight tolerances of the #2 square drive heads. I have never run into a malformed, loose fitting, or jammed up head after driving over a couple thousand of these screws. Keep in mind that these are stainless steel which is a relatively soft metal. They will not stand up to a lot of camming-out before the head strips and you can no longer drive it. So make sure you're aligned, applying adequate driving pressure, and don't use a worn out bit. If you're driving it into something really hard, make sure you pilot the hole first. This is true of any stainless steel screw. Compared to other stainless screws I've used, these are the least likely to strip the heads out or have the heads shear off.
These screws also use patented technology on the threads which helps them bite and cut into softer woods more cleanly and helps reduce splitting. The upper threads near the head are designed to improve clamp up. Often when a regular screw exits the first board and enters the second, the tip takes a moment to bite into the 2nd piece, creating a gap. The segmented thread design here improves the ability to suck up that gap.
The thread design shouldn't be confused with composite deck screws (like Double-Dekkers or Trapease screws) which have counter-threads at the top to prevent mushrooming around the screw hole on a composite board. These screws do not have that feature but are great for just about all other applications where you need a high quality, non-corrosive screw.
Using these is actually a pleasure, they work so well, you feel good about their quality and the quality of the item you're building, the clients are happy, they will last a long time. (Keep carrying this item Amazon!)
Click Here to see more reviews about:
Spax 4577000500637 10-by-2-1/2-Inch Flat Head Stainless Steel Screw, 5-Pound PackSPAX Stainless Steel Screws with #2 square drive are self drilling. Serrations allow for easier driving#2 Square DriveNo pre-drilling304 Stainless Steel
Click here for more information about Spax 4577000500637 10-by-2-1/2-Inch Flat Head Stainless Steel Screw, 5-Pound Pack
